Iwata LPH80
A miniature center post spray gun designed for a variety spraying situations. Spray patterns ranging from 1.6″ round pattern to a full 5.5″ fan pattern the LPH-80 is ideal for large backgrounds, spot repair, blending, shading and touch-up.
- The 1.0/1.2mm nozzle size models have two different air cap setups to cover small to large spray areas and are converted by just a change of the air cap.
- The 102G/122G’s E2 air cap is inspired by the fine atomizing technology of the LPH50.
- The 104G/124G’s new E4 air cap creates finer, wider and flat pattern.
- Lightweight and compact, the Iwata LPH80 is great for small surfaces and tight spaces that can be difficult with full size guns
- Using only 1.8 cfm at 13 psi, this low-air-consumption gun provides high atomization with precise control of the spray pattern with very little overspray
- Optional E4 air cap creates a wide, flat pattern with fine atomization
- Can be used with the 3M PPS System, SATA RPS system, or 150 ml aluminum gravity feed cup (sold separately)
TECHNICAL |
Tip Size | Air Cap |
bar/psi |
|
fluid output (ml/min) |
CFM |
Fan Size (in) |
|
LPH-80 |
||||||||
LPH-80-042G |
0.4 |
E2 |
1.0/13 |
8 |
1.8 |
1.6 |
||
LPH-80-062G |
0.6 |
25 |
2.4 |
|||||
LPH-80-082G |
0.8 |
45 |
3.2 |
|||||
LPH-80-102G |
1.0 |
55 |
3.9 |
|||||
LPH-80-122G |
1.2 |
80 |
4.7 |
|||||
LPH-80-104G (WIDE FAN) |
1.0 |
E4 |
1.0/14 |
60 |
2.2 |
5.1 |
||
LPH-80-124G (WIDE FAN) |
1.2 |
75 |
5.5 |
Reviews
There are no reviews yet.