Clear
-
Activators8 Products
-
Clear Coat Kits10 Products
-
Specialty4 Products
-
Adhere-All Adhesion Promoter – Plastic Primer
$34.99Spray CanGallonQuartKey Features & Benefits:
- Superior Adhesion on Problem Plastics — Works on low-surface-energy materials like TPO, polypropylene, and other flexible/rigid automotive plastics where paint normally won’t stick.
- Ready to Spray — No reducer needed. Just shake and spray for quick, hassle-free application.
- Fast Flash & Recoat Times — Apply a second coat after just 3 minutes flash time. Topcoat with primer or paint in 20-30 minutes.
- Clear Formula — Dries invisible so it won’t affect your color or finish.
- Versatile Use — Ideal for automotive refinishing, custom paint jobs, motorcycle parts, and more. Pairs perfectly with Cande Shop candy paints, ghost pearls, metal flake, and premium clears.
- Professional Results — Eliminates peeling, flaking, and delamination for durable, show-quality paint jobs that last.
- Each Adhere-All aerosol can should treat approximately 8-10 full bumper covers.
-
Base Coat Hardener – Works w/ Our Base Coats, Intercoat, Hard Cande, CBC, Cande & Pearl Coats
$23.99Quart8ozKey Features
- Increased Durability & Longevity – Creates a tougher, more resilient basecoat layer that withstands chips, scratches, and everyday wear.
- Superior Intercoat Adhesion – Promotes stronger bonding between basecoat, intercoat, and clearcoat for a seamless, long-term finish.
- Enhanced Gloss Holdout – Maintains deep, vibrant shine over time with improved resistance to fading and oxidation.
- Reduced Mottling & Dry Spray – Delivers smoother, more even application for flawless candy, pearl, and metallic effects.
- Versatile Compatibility – Works perfectly with Cande Shop CBC, Cande’s, Pearls, Hard Cande, and most other automotive base coats & intercoats.
- Improved Re-coat & Repairability – Makes future touch-ups and repairs easier without compromising the original finish.
Instructions
Add 1-2 ounces of Base Coat Hardener BCH1 per sprayable quart of base coat, pearl, or candy coat. Mix thoroughly before spraying for optimal results.
To read in greater detail about why you should be using our base coat hardener, read The Crucial Role of Basecoat Hardener in Custom Painting
-
Production Clear Coat PC1141 Kit – 1:1 Mix, 41% Solids
$76.99>75 degrees<75 degrees2.5LQuartIncludes Clear & Activator
Why Choose Production Clear PC1141?
- 10 minute flash time
- 8-12 hours dry to sand/buff
- 1:1 Mix Ratio: No complicated ratios—just clear and activator.
- 41% Sprayable Solids: Delivers strong film build and excellent gloss.
- European Resin Technology: Provides superior durability and UV resistance.
- Two Activators: Choose PCA-10 for spot/panel jobs or PCA-20 for cooler/multi-panel work.
- Optional Reducer: Can be reduced 5–10% with urethane reducer to suit your preferences.
Mixing Instructions
1 Part 1 Part PC1141 Clear PCA-10 (75°F+) or PCA-20 (74°F or Below) Tip: Ensure all components are at room temperature (72°F) before mixing.
Technical Specifications
Mix Ratio 1:1 (Reducer optional: 5–10%) Gun Tip 1.2mm–1.4mm Air Pressure (at the nozzle) 8–10 psi (HVLP) / 40–45 psi (Conventional) Pot Life 1 hour @ 72°F / 50% humidity Solids by Weight 41% (sprayable, no reducer) Shelf Life 12 months (unopened) 
-
SEF Flat Clear Coat Kit – Semi-Gloss, Eggshell, Flat
$77.99GallonQuartIncludes Clear & Activator
Why Use SEF Flat Clear Coat?
- Customizable gloss levels – matte, eggshell, or semi-gloss
- Excellent UV resistance for exterior durability
- Low VOC formula – California compliant
- Ideal for hot rods, muscle cars, custom builds & OEM-style refinishing
- Easy to spray with a wide window of application
Adjust Your Gloss Level with These Ratios
SEF Clear Activator Finish Result 4 Parts 1 Part Semi-Gloss 5 Parts 1 Part Eggshell (matches OEM under hood finish) 6 Parts 1 Part Flat / Matte Clear Tip: Always let product reach 72°F before mixing for best results.
-
Southern Clear Coat Kit SC-01 – 2:1 Mix, 46% Solids
$107.99MediumSlowX-Slow5LQuartIncludes Clear & Activator
- 2:1 mix
- 46% solids
- 5 minute flash time
- 6-8 hours dry to sand/buff
Medium – (65°F – 85°F)
Slow – (85-95°F+)
Xtra Slow – (95°F+)
-
Speedball – Speed Cure Urethane Accelerator
$28.99QuartPint8ozInstructions for Use:
Add 5% of Speedball Speed Cure Urethane Accelerator, or one capful per sprayable quart, to your urethane clear coat or urethane primer.
This product is designed for use when temperatures are at or below 70ºF
Key Benefits
- Accelerates Dry-to-Sand Time: Speeds up the curing process, allowing you to complete your projects faster.
- Quick Turnaround: Ideal for professional shops needing rapid results without sacrificing the finish quality.
- Zero VOCs: Compliant with state and federal regulations, making it perfect for use in areas with stringent VOC limits.
- Improves Efficiency: Although it reduces pot life slightly, the increased efficiency for quick jobs makes it a must-have for busy shops.
-
Triple C Intercoat Clear – Candy, Pearl & Flake Carrier
$13.19Spray CanGallonQuartPint8oz4oz“It’s DBC500 on crack!”
Why Choose Triple C Intercoat Clear?
- 💎 Crystal Clear Formula – Zero yellowing or milkiness, ensures pure, untainted color transmission
- 🎨 Ultimate Versatility – Use as a flake carrier, candy/pearl intercoat, color blender, or wet-bed sealer
- 🧩 Perfect for Custom Artwork – Ideal for airbrushing, graphics, and mid-coat layering
- ⚖️ Superior Blend Control – Helps eliminate mottling and streaking in metallic basecoats
- 🏆 Outperforms the Competition – Better than HoK SG100/150, comparable to PPG DBC500
Mixing Ratios (by volume):
Application:
- Flash time: 5–10 minutes between coats
- Dry time before clear: 15–20 minutes at 70°F
- Tape time: 30–60 minutes dry before masking
-
Ultimate 4132 Universal Clear Coat Kit – 4:1 Mix, 32% Solids Overall Clear
$37.99FastMediumSlowGallonQuartIncludes Clear & Activator
Why Choose Ultimate 4132 Universal Clear Coat?
- High-gloss, crystal-clear finish
- Fast drying and easy to apply
- UV resistant and durable
- Compatible with most basecoat systems
- Great for spot repair or full resprays
“The only clear I use” – Kostoff Art
Mixing Ratio
4 Parts 1 Part (Choose your activator based on shop temperature) UC-4132 Clear Coat UA-60 Activator (60°F–70°F), UA-80 Activator (70°F–80°F) or UA-90 Activator (80°F–90°F+) Note: Ensure the clear coat is at room temperature (72°F) before mixing.
Technical Data
Mix Ratio 4:1 Pot Life 2 Hours @ 75°F, 50% RH Gun Setup 1.3mm – 1.4mm HVLP Pressure 8–10 psi Conventional Pressure 40–45 psi % Solids (Sprayable) 32% Shelf Life 12 Months (Unopened) Application Instructions
- Apply basecoat per manufacturer’s instructions.
- Spray 2–3 wet coats (total 2.2–3.6 mils).
- Flash time: 5–10 minutes between coats.
- Maintain 6–10 inches spray distance.
- Tightly close all containers after use.
- Clean equipment immediately after spraying.
Dry Times
Method Stage Time Air Dry @ 75°F Dust Free 5–8 Minutes Ready to Deliver 8–12 Hours Force Dry Purge Time 10 Minutes Bake 30 Minutes @ 130°F metal temp Buffing Air Dry 8–12 Hours Force Dry 1 Hour After Cool Down Notes:
- Reduction affects dry film thickness and VOC levels (not recommended)
- Minimum 2 mils dry film required for UV protection
-
Ultimate Euro 2141 Euro Clear Kit – 2:1 Mix, 41% Solids
$58.99FastMediumSlow5LQuartIncludes Clear & Activator
- High-gloss finish with 100% DOI – crystal clear results
- 41% solids for excellent build and burying flake
- Flat laydown and easy to sand & polish
- 2:1 mix ratio for simple, consistent performance
- Available with multiple temp-range activators (UA-60, UA-80, UA-90)
- National Rule compliant
- Made with top-tier European resin technology
-
Urethane Cande Carrier Kit – 2:1 Mix, 46% Solids
$89.99MediumSlowX-Slow5LQuartIncludes Clear & Activator
-
- Crystal-clear urethane formula for kandy applications
- High solids content: 45.7% (sprayable)
- Easy 2:1 mix ratio – includes activator (UA series)
- Sprays smooth with exceptional leveling
- Compatible with solvent and waterborne basecoats
- Engineered for durability, UV stability, and color retention
-
-
Wetness 2145 High Solids Clear Coat Kit – Low VOC 2:1 Mix, 45% Solids Show Clear
$95.99FastMediumSlowGallonQuartIncludes Clear & Activator
- High Solids: 45% sprayable—more than PPG DCU2021
- Ultra-deep gloss with 100% DOI
- Water-clear finish—perfect for flake, pearls, and kandy work
- 2:1 mix ratio with optional 5% reduction
- Low VOC compliant (CA-legal)
- Exceptional flow, leveling, and gloss retention
- Buffs easily after full cure
Fast: WA-160 (60°F – 75°F)
Medium: WA-175 (75°F – 90°F)
Slow: WA-190 (90°F+)Note: Always mix at room temperature (72°F) for best results.
-
Wetness 3140 Speed Clear Kit – 3:1 Mix, 40% Solids Speed Clear
$83.99FastMediumSlowGallonQuartIncludes Clear & Activator
- Gallon Kit makes: 1 gallon (sprayable)
- Quart Kit makes: 42oz (sprayable)
Why Choose Wetness 3140 Speed Clear
- Fast Dry & Buff: Sand or polish in as little as 90 minutes (not designed for overalls)
- Low VOC & California Compliant
- Excellent Gloss & Clarity
- UV-Resistant for long-term protection
- Versatile Catalyst System: Works across a wide temperature range
- Made in the USA
- NOTE: Not designed for overall full re-sprays, this is for single panel or multi-panel jobs.
Mixing Ratio
3 Parts 1 Part Wetness 3140 WA-60 (60°F–75°F), WA-75 (75°F–90°F) or WA-90 (90°F+) (Optional) Reducer Up to 5% Note: Ensure product is at room temperature (72°F) before mixing.
Technical Data
Spec Value Mix Ratio 3:1 (Reducer optional) Solids 40% sprayable (no reducer) Pot Life 45 min @ 72°F, 50% RH Gun Tip 1.2mm – 1.4mm Air Pressure (at air cap) 8–10 psi (HVLP), 40–45 psi (Conventional) Shelf Life 12 months unopened Application Guidelines:
- Apply color basecoat per manufacturer’s recommendations.
- Apply 2 wet coats of Wetness 3140 with 3–5 minutes flash between coats.
- Use 1.2mm–1.4mm tip at 8–10 psi (HVLP) or 40–45 psi (conventional).
Dry & Buff Times
Method Dust-Free Sand Deliver Buff Air Dry (70°F) 5–7 min 1.5–2 hrs 3–4 hrs 2.5–3 hrs Force Dry 10 min purge 15–20 min @ 140°F (slow only) After cool down After cool down Notes:
- Optional reduction with Urethane Reducer up to 5%
- Reduction affects dry film thickness and VOC levels
- Minimum 2 mils dry film required for UV protection
-
Wetness 4136 Medium Solids Clear Coat Kit – Low VOC 4:1 Mix, 36% Solids
$69.99FastMediumSlowGallonQuart“One of the Extremely Best Clears on the Market” – Darrell Keyes
Includes Clear & Activator
Why Choose Wetness 4136?
-
- 36% solids – higher than most “medium solids” clears
- 100% DOI – mirror-like reflections with zero distortion
- Fast drying and easy to spray
- Low VOC – California compliant
- Premium European resin formulation
- 4:1 mix ratio with temperature-specific activators
Mixing Ratio
4 Parts 1 Part W-4136 WA-60 (60°F – 75°F) WA-75 (75°F – 90°F) WA-90 (90°F+) Note: Ensure product is at room temperature (72°F) before mixing.
Technical Data
Mix Ratio 4:1 Pot Life 2 hours @ 72°F, 50% RH Gun Setup 1.2mm – 1.4mm Air Pressure (at air cap) 8–10 psi HVLP / 40–45 psi Conventional Solids by Weight 36% (Sprayable – no reducer) Shelf Life (Unopened) 12 Months -
